Company

Contact Information

History of TatAISenergo

In spite of apparent youth TatAISenergo is proud of its long history, treats all generations of colleagues with respect and care.

The branch of Tatenergo - TatAISenergo (now it is called LTD TatAISenergo) is founded on the basis of Automation and Information Technologies Department of the power-company of the Republic of Tatarstan. A&IT Department, or earlier Communications Service and Automatic Control System, -sub-unit with more, than 30 years history.

Initiative of creating the group of computer engineering in the power system of Tatarstan Republic belonged to chief dispatcher Mr.Dubitsky, who as a competent and progressive expert was sure that it is impossible to control power system without computer engineering. First on computer engineering "NAIRI-2" (Erevan city production) were manufactured calculations of Tatar power system for CDS (Central Dispatching System), then calculations of short-circuit current for Central Service of Relay Protection and Automation (CSRPA), installation of Underfrequency Load Shedding (ULS) and   Autoreclosing after ULS optimal points of cut in network. Department staff was not large: it consisted of 5 members.

 

At the beginning of 1973 on the basis of Order №9 dated on 14.02.1973 the Automatic Control System Department was created. Mr.Mukhachev was appointed as the head of the Department. Young, energetic programmers and engineers from the Kazan computer plant, graduators of the Moscow Power Engineering Institute, the Kazan Aviation Institute and the Kazan State University were offered a job as the experts. At the end of the year the Automatic Control System Department calculated 19 persons.

 Отдел АСУ

There were many tasks in power system especially for operating-technology control. Basic developers of programs were: the Institute of Electrodynamics Academy of Science of the USSR and others.

In November 1973 the computer "EVM M-222" was set into operation, which served not only services and management personnel departments, but also enterprises, situated in Kazan city. Computer permitted to render automatic salary accounting, financial and calculating transactions, basic founds accounting.

Оператор ЭВМ М-222Монтаж СМ-1420 

From July 1976 running of M-222 is transferred to three shifts work. On the 1st of July of 1977 the statement about putting of the first line of automatic control system into industrial running after careful examination of the Ministry of Energy of the USSR committee was signed. The head of admission committee was the chief engineer of Tatenergo Mr.Malov.

Sub-Units of Tatenergo and some enterprises acquired experience of usage the computer for solving own tasks, what gave the organizational and technical possibility to make a step to the following development of automatic control system for 4 years.

 ЭВМ M-6000-1tatais_05

The following step in life and development of Automatic Control Systems Department was the new generation of computers - large computing machines of the ES line of third generation. They were differ from those that were manufactured in single standard both at plants in Russia, and countries of socialist concord (Bulgaria-disks "Izot", Hungry- monitors " Video-ton", Germany-ML).

In 1978 the computer "EVM ES-1022" of Minsk Computer Plant was set in operation. This decision significantly extended circle of tasks, quantity of staff and quantity of sub-units, which started actively use calculations on computer in own work. There were more than 112 programs in running already.

From 1979 in Automatic Control Systems Department a new specialization appears. In particular is picked out a new direction - Process Control Systems (PCS).

Absence of remote control and teleprocessing of information system, connection with enterprises of Tatenergo in real-time mode limited the possibilities of manual supervision. In 1979 the course to supervisory control automation on the base of minor master of the computer "EVM M-6000" was put. 

In 1980 the Automated Dispatching Control Systems department (ADCS) is created and cleanup activities for "EVM M-6000" installation have been started. In 1981 the single-machine bundled software "OIK-SV" have been put into commission which operated in around-the-clock work.

 Субботник в ЛОКе. 1981 годГруппа телемехаников. 1982 год

Control of continuous gathering and processing of technological information provided the team of duty engineers, electricians, electronics engineers, programmers and the team of telemechanical engineers of the Means of Dispatching Control Service (MDCS).

 

On the 30th of November 1983 the statement about admission to the industrial running two lines of ACS and the first line ADCS was signed. In that period the Automatic Control System Department calculated 74 persons.

A direction of rated tasks for economists, accountants and engineers simultaneously developed either.  

From March 1984 the head of the Automatic Control System Department was Mr.Sivelkin

The first micro computers type of "BK0010", "D-3/28" appeared in the market from the middle of eighty years. Those primitive computers found its application at once: jointly with the firm "KOMTEX" by the Automatic Control System Department devices for debugging air-circuit breakers, processing of results chromatographic oil analysis, for debugging voltage regulators under load were manufactured; gas meter, manufactured controllers for indication analysis of automatic recorders were created.

On the 17-th of March 1987 an informational letter from the Major Energy Computing  Center about realization of personal computers in the Ministry of Energy was published. In the face of programmers was the task of shifting of all programs into personal computers, learning new programming languages and methods of programming on personal computers. Little programs were written by us, large complexes were bought by us. The analysts from the following cities as Lvov, Saratov, Alma-Ata, Moscow were invited. So, there appeared the programs: "Etap" for "Energonadzor", "UFRO", "Basic founds".

 Отделу АСУ 10 лет

In 1994-1997 by group of specialists (Valeriy Golovanov, Dmitry Yaskevich, Alexander Lonkin) foundations of future processing solutions are put: building of local computer networks, subscriber stations and communication net nodes "Electra", reference node at the Zainsk Heat&Power Plant set into running, net nodes of "Electra" at the Kazan Heat&Power Plant-1, the Kazan Heat&Power Plant-3, the Nishnekamsk Heat&Power Plant-1 developed. Total volume of information according to the system "Electra" in 1997 arranged 5 GB. In 1997 web server "Tatenergo" is set into running.

In 1995 at potential of branch ADCS, on the basis of the system "TRACE MODE" Operational Measuring Complex (OMC) was created and set into running. Now it is difficult to imagine power system without OMC. 

In 1999 on the basis of the ACSD and MDCS the Automation and Information Technologies Department (AITD) under the direction of Mr.Bandurin was created. In staff of the AITCD were already seven special directions, number of which achieved 120 persons. Services of the AITD of "Tatenergo" provided collection processes, transportation, storage, information safety and its offer to users.

From the year of 2000 the IT started to gouge system according to the Program of development of IT. In capacity of initiator performed a new head of the AITD - Mr.Fazylzyanov.

2001 is called a year of financial recovery in Tatenergo. It was taken the Program where in the list of measures enterprise-wide network of data communications and Systems of Commercial Calculation of Energy Carriers (gaz, power, heat) took one of the important places. Within the limits of this program was created a group for gouging and running tasks of Systems of Commercial Calculation of energy supplies.

In August 2004 by the order of General Director of JSC "Tatenergo" the branch "TatAISEnergo" was created. The purpose of creating lied in foundation of specialized enterprise for data ware and manufacturing support of all kinds of management processes in the Company and in other enterprises of power system.

Functions of planning, creating and enterprise systems development were entrusted onto the branch. Such functions were assigned as a method direction and control for communication services activity (MDCS) and automatic control system departments at power enterprises, conduction of single technological policy in the field of info communication technologies. Besides, the running of upright integrated communications, telecommunications, telemetry and etc lied to the branch. Oleg Karpenko was appointed as the director of the branch.

 Служба программного обеспеченияСлужба программного обеспечения

In TatAISenergo were included five production services:

●Communications service (Means of Dispatching Control Service - MDCS);

●System integration service;

●Process control systems Service (PCSS);

●Software service;

●Users support service

In 2005 it was taken the Program of IT development for the period 2005-2008, determined strategic plan of IT development and communication system of JSC "Tatenergo". Concrete tasks were set: to render automatic basic processes of accounting, material procurement, expenditures calculation, financial and personnel management, and also coordination of data streams between information systems in the limits of single information space.

Implementation of the Enterprise Resource Planning System (ERP) and Electronic Document Management (EDM) and Workflow System for optimization of document circulation inside of the holding company and increasing of management quality with administrative-organized documentation was held in power system with TatAISenergo efforts exclusively.

In 2006 the Service of Billing Systems of Commercial Calculation of Electric Power is created in TatAISenergo. And at the present time in Tatenergo systems of commercial calculation of energy carriers are put into operation and the Statement about conformity of electric power commercial calculation system with technical requirements of wholesale market with conferment of quality set coefficient received.  

Works on increasing of quality information gathering by the way of implementation of informational systems on reliability of accounting, load balancing calculation, preparation of software of losses calculation are being continued now. In the part of communication and connection development the replacement of exchange in all branches into modern digit stations Definity is conducted.  All supervisory switches have been changed simultaneously into homogeneous equipment. In Closed Joint-Stock Company "Regional Dispatching Department" (RDD) supervisory switch by Siemens is invoked into running created by new technology and first installed in Russia. According to the program of development enterprise-wide network of data communications at present time all District Current Networks (DCN) and Industrial Districts (ID) except the basic enterprises of power system are connected. In accordance with requirements of Balancing Market of Electric Power upgrade of enterprise -wide network of data communications is proceeding.

 

ТатАИСЭнерго

In the limits of power industry treatment conversion of information technologies of Tatenergo holding company is continuing. After allocation into separate branch TatAISenergo and creating on its foundation of autonomous company at enterprises of power engineering of Tatarstan Republic the Informational Control Systems Department and the Customer Service in IT are organized saving vertical control.

Nowadays TatAISenergo is a community of professionals, having a good command and loving their work, achieving their goal. This is the community which values the past and thinks about the future.